Quality Inspection for 60 Bucket Tooth Bar - PC400/208-70-14270RC Komatsu Tooth Standard Komatsu bucket teeth – Xuansheng Detail:
PC400 Bucket Teeth
| No. | 208-70-14270RC |
| Applicable model | Komatsu PC360/PC390LC/PC400/PC460LC/PC450/PC500LC; Sumitomo 360/380; Kobelco 30; Lonking 30-40 excavator |
| Product weight (kg/pc) | 14.3 |
| Production status | In production |
● Inner cavity diameter: 14.4CM
● Width: 14.8CM
● Inner cavity length: 11.1CM
● Height: 13.5CM
● Inner cavity width: 9CM
● Length: 32.6CM
Advantages
Jiangsu Xuan Sheng bucket teeth have high quality, are durable, and operate without any problem.
Sophisticated design
Smooth product lines show beauty and elegance
Clear texts
Clean punching facilitates identification of texts and numbers
Durable
This mountain cutting model is specific for mines and has longer service life
Shipping Instruction
| Our bucket teeth are shipped by order weight, so as to ensure safe and reliable packaging of products | |
| 1-30kg | Thickened carton |
| 30-200kg | Large volume woven bag |
| Over200kg | Customized wooden box |
Bucket teeth of 1-30KG are shipped in thickened cartons, bucket teeth of 30-200KG are shipped in large volume woven bags, and bucket teeth of over 200KG are shipped in customized wooden boxes.
Bucket Teeth User Guide
The wear of the bucket teeth seat is also very important to the service life of the bucket teeth. It is recommended to replace the seat after it has been worn out by 10-15% because there is a large gap between the seat and the bucket teeth due to excessive wear, which changes the fit and force point of the bucket teeth and the seat and may further lead to the fracture of the tooth sleeve.
Practical experience shows that the outermost bucket teeth usually wear out faster than the innermost bucket teeth by 30% in the use of bucket teeth. We suggest you switch the position of the inner and outer bucket teeth after a period of time, to keep even wearing of the inner and outer bucket teeth.
Product detail pictures:
Related Product Guide:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Quality Inspection for 60 Bucket Tooth Bar - PC400/208-70-14270RC Komatsu Tooth Standard Komatsu bucket teeth – Xuansheng, The product will supply to all over the world, such as: Montreal, Dubai, Hungary, With the support of our highly experienced professionals, we manufacture and supply best quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.
By Camille from Bulgaria - 2017.10.25 15:53
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Freda from Juventus - 2018.09.23 17:37
