High Quality for Bucket Bite Tooth Bar - PC200/205-70-19570RC Komatsu Tooth Standard Komatsu bucket teeth – Xuansheng Detail:
PC200 Bucket Teeth
| No. | 205-70-19570RC |
| Applicable model | Komatsu PC130/ PC160LC/ PC200/ PC200LC/ PC210/ PC210LC/ PC215/ PC215LC/ PC215HD; Sumitomo 210/ 220; Shantui old model excavator 200/210; SDLG 6225F; Liugong 922 |
| Product weight (kg/pc) | 5.9 |
| Production status | In production |
● Inner cavity diameter: 11.3M
● Width: 10.2CM
●Inner cavity length: 7.3CM
●Height: 11CM
●Inner cavity width: 8.1CM
●Length: 25.2CM
Why Do We Make: Forged bucket teeth The Products Comparison Conclusion.
- Cast bucket teeth
01
Higher production technology level than cast bucket teeth, stable quality;
02
Decided production shape, good for mass production
03
Improvable performance index, tooth shape design and reducing customer cost by more than 30%.
04
Automatic assembly line production, less manual labor, low electricity consumption reduced by 50%, qualified less pollution production promoted by government.
05
Intensive plant area, efficient infrastructure investment
- Cast bucket teeth
01
Mature products but unstable quality.
02
Complex shapes available
03
Limited by process craft, the production is close to the economic limit for high wear resistance so that hard to be improved.
04
High electricity, labor costs and decentralized plant size, inefficient landuse.
05
Lots of dust, solid waste, considered as pollution industry.
Bucket Teeth User Guide
The types of bucket teeth should be selected based on the working environment, and the right teeth shape can reduce the digging resistance and save fuel. When the sharp part of the bucket teeth is worn severely, the force required for the excavator to complete the cutting action will be increased greatly, resulting in greater fuel consumption and affecting work efficiency. Therefore, it is necessary to replace the bucket teeth with new ones in time when you check serious loss of the bucket teeth.
During the daily maintenance of the excavator, take a few minutes to check the bucket teeth every day. You should mainly check the bucket teeth for wear. Replace with a new sleeve in case of serious wear. In addition, you should kick the bucket teeth to check whether the bucket teeth are stable, and if the bucket teeth are loose, you should tighten them immediately.
Product detail pictures:
Related Product Guide:
To meet the customers' over-expected pleasure , now we have our potent staff to offer our greatest general service which includes internet marketing, sales, planning, output, quality controlling, packing, warehousing and logistics for High Quality for Bucket Bite Tooth Bar - PC200/205-70-19570RC Komatsu Tooth Standard Komatsu bucket teeth – Xuansheng, The product will supply to all over the world, such as: Czech, Romania, kazan, We have more than 100 works in the plant, and we also have a 15 guys work team to service our customers for before and after sales. Good quality is the key factor for the company to stand out from other competitors. Seeing is Believing, want more information? Just trial on its products!
By Alex from Peru - 2017.01.11 17:15
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Samantha from New York - 2018.06.18 19:26
