Factory For 66 Bucket Tooth Bar - PC300/207-70-14151RC Komatsu Tooth Standard Komatsu bucket teeth – Xuansheng Detail:
PC300 Bucket Teeth (Wear-resistant Type)
| No. | 207-70-14151RC |
| Applicable model | Komatsu PC220/PC240LC/PC270/PC300; Sumitomo 30; Sunward; Lovol 260E |
| Product weight (kg/pc) | 9.9 |
| Production status | In production |
● Inner cavity diameter: 12.5CM
● Width: 12.5CM
● Inner cavity length: 11CM
● Height: 11.42CM
● Inner cavity width: 9.2CM
● Length: 33CM
PC300 Bucket Teeth (Light Type)
| No. | 207-70-14151RC |
| Applicable model | Komatsu PC220/PC240LC/PC270/PC300Sumitomo 30; Sunward; Lovol 260E |
| Product weight (kg/pc) | 8 |
| Production status | In production |
● Inner cavity diameter 12CM
● Width: 12.5CM
● Inner cavity length: 9CM
● Height: 11.6CM
● Inner cavity width: 8.5CM
● Bore diameter: 3.2CM
● Length: 27CM
Xuan Sheng Forged Bucket Teeth
High abrasion resistance
Higher wear resistance for the same model of bucket teeth.
Sharper
Reasonable tooth design makes teeth sharper, increases wear ratio and reduces residual part.
Lower cost of use
Lower loss per unit hour (lower cost of use).
Differences Between Cast Bucket Teeth And Xuan Sheng Bucket Teeth
| Cast bucket teeth | Xuan Sheng bucket teeth | Result | |
| Weight | 11.55KG | 11.6KG | Basically the same |
| Accumulative service life | 85H | 120H | Service life is extended by 41.2% |
| Loss per unit hour (RMB yuan) | 1.94 | 1.375 | Cost is reduced by 29% |
Company Profile
Product detail pictures:
Related Product Guide:
Which has a positive and progressive attitude to customer's desire, our corporation constantly improves our merchandise quality to satisfy the desires of consumers and further focuses on safety, reliability, environmental demands, and innovation of Factory For 66 Bucket Tooth Bar - PC300/207-70-14151RC Komatsu Tooth Standard Komatsu bucket teeth – Xuansheng, The product will supply to all over the world, such as: Surabaya, India, Johannesburg, We are in continuous service to our growing local and international clients. We aim to be worldwide leader in this industry and with this mind; it is our great pleasure to serve and bringing the highest satisfaction rates among the growing market.
By Jean Ascher from Brunei - 2017.09.30 16:36
We are really happy to find such a manufacturer that ensuring product quality at the same time the price is very cheap.
By Elma from Costa rica - 2018.06.21 17:11
